** News! Amazon Black Friday Cyber Monday 2022 Sale is Now Live!
** Start Your Savings Here –
** Check he new Holiday Gift Guide 2022 –
************************************************************************
+ Visit Cybex For More:
The New CYBEX Sirona S is the first convertible car seat in the U.S. to feature an innovative 360 rotatable seat with a load leg offering advanced protection so you can have greater peace of mind when it comes to your child’’s car seat safety.
Other award-winning Sirona S features include
SensorSafe Technology
12-Position Recline Adjustment
Height Adjustable Headrest
Linear Side-Impact Protection
EasyLock Bar that Reduces Force Needed for Quick, Simple, Secure Installation
One-time Vehicle Belt Installation for both Rear-Facing and Forward-Facing Mode
Also Watch:
#Cybex Baby Guide: The New Sirona S by CYBEX tutorial ( US version)
#Kolcraft Baby Guide: Tiny Steps Features
#MagicBeans Guide: UPPAbaby Cruz V2 vs. Bugaboo Lynx 2020 | Stroller Comparison | Stroller Review | Magic Beans
#BabyEinstein Guide: Baby Einstein Classics Trailer
#BabyEinstein Guide: Baby Einstein Numbers Series Trailer
#Clipadvise
*As an Amazon Associate I earn from qualifying purchases
[Music] Please be sure to read the instruction Manual and all labeling on the car seat Prior to use unfold the load leg on the Bottom of the base until it clicks in The down position and the indicator Turns green Place the Sirona s with a low leg Hanging over the edge of the vehicle Seat pull out the lower anchors from the Backside of the base Squeeze the recline handle push through The full upright position and swivel the Seat to access the belt path pull open The belt path cover on the base lift and Position the ez lock handle to expose The belt tensioner slide the orange Button on the belt tensioner then move The ez lock handle toward the car seat And pull up to open the belt tensioner Make sure each connector is oriented in The correct direction attach each lower Anchor connector to the corresponding Vehicle anchors you should hear a click To know they are secure pull tail of Lower anchor strap to remove slack place Belt tensioner over the lower anchor Strap position the ez lock to set the Pegs push down on the ez lock handle to Close the belt tensioner now reattach The belt path cover adjust the load leg So it has firm contact with your vehicle Floor and is locked there should never Be space between the load leg foot and
The vehicle floor check for tightness by Grabbing the car seat at the belt path And make sure there is no more than one Inch of movement pull out the tether From the storage compartment on the back Of the Sirona S and place it over the Car seat squeeze the recline handle and Swivel the seat to a locked Forward-facing position check the level Indicator to ensure the recline ball is In the red zone when forward-facing Locate the vehicle tether anchor and Attach the Sirona s tether hook to the Vehicle’s tether anchor pull the tether Strap to tighten if installing next to a Vehicle door extend the linear side Impact protection device You [Music] Please read the instruction manual and All labeling on the car seat prior to Use unfold the load leg on the bottom of The base until it clicks in the down Position and the indicator turns green Place the Sirona S with a low leg Hanging over the edge of the vehicle Seat squeeze the recline handle push Through the full upright position and Swivel the seat to access the belt path Pull open the belt path cover on the Base lift and position the ez lock Handle to expose the belt tensioner Slide the orange button on the belt Tensioner then move the ez lock handle
Toward the car seat and pull up to open The belt tensioner route your vehicle Seat belt through the openings on the Sides of the base and through the blue Belt guides buckle the belt pull the Shoulder belt to remove any excess slack And make sure the belt lies flat without Twisting place the belt tensioner over The seat belt position the ez lock to Set the pegs on the belt tensioner push Down on the ez lock handle to close the Belt tensioner reattach the belt path Cover adjust the load leg so it has firm Contact with your vehicle floor and is Locked there should never be space Between the load leg foot and the Vehicle floor check for tightness by Grabbing the car seat at the belt path And make sure there is no more than one Inch of movement pull out the tether From the storage compartment on the back Of the Sirona s and place it over the Car seat squeeze the recline handle and Swivel the seat to a locked Forward-facing position check the level Indicator to ensure the recline ball is In the red zone when forward-facing Locate the vehicle tether anchor and Attach the Sirona s tether hook to the Vehicle’s tether anchor pull the tether Strap to tighten if installing next to a Vehicle door extend the linear side Impact protection device You
[Music] Please be sure to read the instruction Manual and all labeling on the car seat Prior to use unfold the load leg on the Bottom of the base until it clicks in The down position and the indicator Turns green place the Sirona S with a Load leg hanging over the edge of the Vehicle seat pull out the lower anchors From the backside of the base squeeze The recline handle push through the full Upright position and swivel the seat to Access the belt path pull open the belt Path cover on the base lift and position The ez lock handle to expose the belt Tensioner slide the orange button on the Belt tensioner then move the ez lock Handle toward the car seat and pull up To open the belt tensioner make sure Each connector is oriented in the Correct direction attach each lower Anchor connector to the corresponding Vehicle anchors you should hear a click To know they are secure Pull tail of lower anchor strap to Remove slack place belt tensioner over The lower anchor strap position the ez Lock to set the pegs push down on the ez Lock handle to close the belt tensioner Now reattach the belt path cover Adjust the load leg so it has firm Contact with your vehicle floor and is Locked there should never be space Between the load leg foot and the
Vehicle floor check for tightness by Grabbing the car seat at the belt path And make sure there is no more than one Inch of movement squeeze the recline Handle move the seat to lock in your Preferred position check the level Indicator to see that the recline ball Is in the Blue Zone when rear-facing if Installing next to a vehicle door extend The linear side impact protection device [Music] Please read the instruction manual and All labeling on the car seat prior to Use unfold the load leg on the bottom of The base until it clicks in the down Position and the indicator turns green Place the Sirona S with a low leg Hanging over the edge of the vehicle Seat squeeze the recline handle push Through the full upright position and Swivel the seat to access the belt path Pull open the belt path cover on the Base lift and position the ez lock Handle to expose the belt tensioner Slide the orange button on the belt Tensioner then move the ez lock handle Toward the car seat and pull up to open The belt tensioner route your vehicle Seat belt through the openings on the Sides of the base and through the blue Belt guides buckle the belt pull the Shoulder belt to remove any excess slack And make sure the belt lies flat without Twisting place the belt tensioner over
The seat belt position the ez lock to Set the pegs on the belt tensioner push Down on the ez lock handle to close the Belt tensioner reattach the belt path Cover adjust the low leg so it has firm Contact with your vehicle floor and is Locked there should never be space Between the load leg foot and the Vehicle floor check for tightness by Grabbing the car seat at the belt path And make sure there is no more than one Inch of movement squeeze the recline Handle and move the seat to lock in your Preferred position check the level Indicator to see that the recline ball Is in the Blue Zone when rear-facing if Installing next to a vehicle door extend The linear side impact protection device You